Universal Vibration Apparatus in Three Modules

The Mechanical vibrations, near about 10 to 12 experiments are to be conducted. The conventional system was to provide a common frame to conduct all the experiments. The procedures was cumbersome and time consuming to assemble and dismantle each experiment and possessed lot of inconvenience. Also, vibrations of main frame itself was a nuisance. To avoid this, we made the vibration apparatus in three different modules, one each for torsional vibrations, pendulum experiments and transverse vibrations. This has nearly eliminated the procedure of assembly and dismantling of the experiments and secondly, at a time three batches simultaneously can conduct the experiments. Also, we are providing additional 12th experiment of Trifilar suspension. So with 'DYNAMIC's Modular Universal Vibration Apparatus, conducting vibration experiments has become very easy and quick

Critical Radius of Insulating Material Apparatus
It is well known fact that addition of insulation over a hot cylinder always does not reduce the heat loss, because heat loss increases up to critical radius. The 'DYNAMIC' apparatus consists of four test cylinders having insulation of different thickness and a heater inside. Inside and outside temperatures of insulation can be measured and by properly adjusting the inputs to the heaters, it can be shown that heat loss ( i.e. input ) is maximum for the test piece whose insulation thickness was near critical radius. Thus the equipment demonstrates a very important and interesting phenomenon. ( No ! Don't misplace this with Critical Heat Flux - a boiling heat transfer apparatus. This is conduction heat transfer apparatus.)

Epicyclic Gear Train & Holding Torque Apparatus
Epicyclic gear trains are widely used in industries and automobiles.But their construction and operation is rarely seen by students. 'DYNAMIC' has developed the apparatus which can show the construction and also students can make the experiments with it. The gears trains is driven by a motor. The sun gear drives two planet gears which mesh with an internal gear. Either the internal gear or the planet gear carrier can be hold stationery and input torque, output torque and holding torque can be measured. Thus the student can have complete insight of the epicyclic gear train with the apparatus.