HYD - 12      HYDRAULICS  LABORATORY EQUIPMENTS

   
   
  12251 12203  
  HYDRAULICS HYDRAULICS LABORATORY  
  Click Hear to Large View
Click Hear to Large View  
   
   
   
  CENTRIFUGAL PUMP TEST RIG 
CONSTANT SPEED – Centrifugal pump, provided with three phase motor, vacuum gauge at suction and pressure gauge on discharge pipe, gate valve at discharge, which facilities estimation of pump performance at various discharge heads. AC MOTOR & PULLEY TYPE – As per constant speed type, only pump is provided with a three speed pulley, gate valve at discharge to vary the head. DC MOTOR VARIABLE SPEED —As per constant speed type, only pump is provided with a variable speed drive and gate value at discharge to vary the speed.
12201
   
   
  AC MOTOR AND PULLEY TYPE                                                   
12202
   
   
  DC MOTOR VARIABLE SPEED TYPE                                         
12203
       
       
  MULTISTAGE CENTRIFUGAL PUMP TEST RIG.
Two stage centrifugal pump provided with three phase motor, vacuum gauge at suction & pressure gauge on discharge pipe, pump is a monoblock (I S I Kirloskar) provided with gate valve at discharge which facilities estimation of pump performance at various discharge heads.
12210
       
       
  CENTRIFUGAL PUMPS IN SERIES & PARALLEL APPARATUS
To study characteristics of pumps in individual or combined operation required head or discharge cannot be obtained by a single pump, two or more pumps are connected is series or parallel, multistage pump in series connection of two pumps which give same discharge at higher head while pumps operating in parallel give higher discharge at same head.
12220
       
       
  RECIPROCATING PUMP TEST RIG
A recirculating type unit with reciprocating pump and vacuum gauge & pressure gauge at discharge by measuring input to motor and output of pump performance can be estimated at three different speed by using pulley.
12231
     
     
  RECIPROCATING PUMP TEST RIG [DC MOTOR WITH DIMMER CONTROL]
A recirculating type unit with reciprocating pump & vacuum gauge & pressure gauge at discharge, by measuring input to motor & output to pump performance can be estimated at different speed by means of one at different heads using dimmerstate.
12232
     
     
  DC MOTOR AND THYRISTORISED CONTROL TYPE
12233 
     
     
  DC MOTOR (Swinging field) & THYRISTORISED CONTROL TYPE 12234
     
     
  GEAR PUMP TEST RIG
To determine characteristics – Speed Vs Discharge, Head Vs Discharge, Discharge Vs Input Power, Discharge Vs efficiency. A recirculating type unit. All the measurements are provided to evaluate the performance of gear pump.
12240
     
     
  PELTON WHEEL TURBINE TEST RIG - 1.3 HP (1 Kw) Cap.
To, visualise the operation & estimate B. H. P. & W. H. P. and various efficiencies of pelton turbine. Pelton wheel connected to a rope brake. Water supplied by centrifugal pump & flow measured by venturimenter & mercury manometer.
Water jet is directed over the buckets by a nozzle & a spare operating inside the nozzle controls the water flow.
12251
     
     
  PELTON WHEEL TURBINE TEST RIG
As same above unit is available for 5 HP with 15 HP recirculating pump.
12252
     
  KAPLAN TURBINE TEST RIG
To show the operation & performance characteristics of Kaplan Turbine. A vertical shaft Kaplan Turbine to develop 5 HP at 1500 rpm, rope brake arrangement.
12260
     
  5 HP Capacity Francis Turbine Test Rig (Closed Circuit)         12261
     
  FRANCIS TURBINE TEST RIG
A fully self – contained unit to show the operation & performance characteristics of Francis Turbine to develop 5 HP at 1250 RPM, rope brake arrangement.
12270
 
 
  HYDRAULIC RAM
To study performance of ram, without any external energy. Hydraulic Ram is a device used for pumping small quantity of water high head, large quantity of water at small head is available.
12280
   
  AXIAL FLOW PUMP TEST RIG
12291/92
   
 

 

     
   
Designed by : MID  Hosted by : PBD  Promoted by : GID